AquaSPArkle Spa pH Plus / pH Increaser - 1kg

The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2.

Application Instructions

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst the pump(s) are turned “on”.
2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. 

Dosage

Add pH Plus at a rate of 11 grams per 1000 litres (220 gallons) of spa water, and repeat the treatment if necessary.

Always read the instructions on the container prior to us.